Calculation templates

Duplicate and customize calculation templates for your next project

Clear filters
Civil engineering
Construction
Electrical engineering
Fire safety engineering
General
Geotechnical engineering
Maths
Mechanical engineering
Physics
Products & materials
Structural engineering
Discipline
All
All
AS/NZ
EUR
IND
UK
US
Global
CA
Jurisdiction
All
all
0 templates found

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Structural engineering
United States
STR-353
ACI 318-19: Brackets and corbels - Dimensional limits (16.5.1.1, 16.5.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-359
ACI 318-19: Two-way shear - vc for members with shear reinforcement (22.6.6, Table 22.6.6.1, and Table 22.6.6.3)
🇺🇸
US
November 14, 2026
Structural engineering
Europe
STR-40
Steel Base Plate Calculator to Eurocode 3
🇪🇺
EUR
November 14, 2026
Structural engineering
Australia and New Zealand
STR-429
Concrete properties to AS 3600
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-417
Capacity reduction factors (AS 3600)
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Europe
STR-404
EN 1991-1-4: Wind Force on Circular Cylinder Elements - Force Coefficient Method (Section 7.9.2, Figure 7.28 and 7.36, Eq. 5.3)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-405
EN 1991-1-4: Wind on Free-Standing Walls and Parapets - Net Wind Pressure per Zone (Section 7.4)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-420
EN 1991-1-4: Wind Pressure on Building Side Walls - External and Internal Pressure per Zone (Sections 7.2.1 7.2.2 7.2.9 5.2)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-436
EN 1992-1-1 Section 4.4 and Annex E: Nominal Cover and Minimum Strength Class for Durability
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-421
EN 1992-1-1 §8.3: Permissible Mandrel Diameter for Bent Bars
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-433
EN 1992-1-1 §6.2.5: Shear at the Interface Between Concrete Cast at Different Times
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-418
EN 1992-1-1 §6.4: Punching Shear, Internal Circular Column (Slab or Foundation)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-424
EN 1992-1-1 §8.4 and §8.7: Anchorage and Lap Lengths
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-407
EN 1992-1-1 §6.2.1 to §6.2.3: Shear Design of a General Concrete Cross-Section
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-412
EN 1992-1-1 §6.4: Punching Shear, Internal Rectangular Column (Slab or Foundation)
🇪🇺
EUR
November 14, 2026
Structural engineering
Australia and New Zealand
STR-402
AS 5216:2021: Seismic Design Resistance of Anchors
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-419
AS 5216:2021: Combined Tension and Shear Interaction of Anchors
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-423
AS 5216:2021: Anchor Forces under a Rigid Base Plate
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-427
AS 3600:2018: Concrete Bearing Under a Base Plate
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-403
AS 5216:2021: Concrete Edge Failure of Anchors in Shear
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-415
AS 5216:2021: Splitting Failure of Anchors in Tension
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-425
AS 5216:2021: Combined Pull-out and Concrete Failure of Bonded Anchors in Tension
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-428
AS 5216:2021: Pull-out Failure of Headed Anchors in Tension
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-430
AS 5216:2021: Pull-out Failure of Anchors in Tension
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-413
AS 5216:2021: Steel Failure of Anchors in Shear with Lever Arm
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-411
AS 5216:2021: Steel Failure of Anchors in Shear
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-410
AS 5216:2021: Steel Failure of Anchors in Tension
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-414
AS 5216:2021: Pry-out Failure of Anchors in Shear
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-401
AS 5216:2021: Concrete Cone Failure of Anchors in Tension
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Europe
STR-409
EN 1991-1-4: Wind Pressure on Monopitch Roofs (Section 7.2.4)
🇪🇺
EUR
November 14, 2026
Structural engineering
Australia and New Zealand
STR-431
AS 3600: Reinforcing Bar Properties (D500N)
🇦🇺
AS/NZ
November 14, 2026
Geotechnical engineering
Global
GEO-426
Lane's Weighted Creep Ratio (Seepage under Hydraulic Structures)
🌐
Global
November 14, 2026
Structural engineering
Europe
STR-432
EN 1991-1-4: Wind Force on Signboards (Section 7.4.3)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-422
EN 1991-1-4: Wind Force on Rectangular Prism Elements, Force Coefficient Method (Section 7.6)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-416
EN 1991-1-4: Peak Velocity Pressure (Section 4.5, Eq. 4.8)
🇪🇺
EUR
November 14, 2026
Structural engineering
United States
STR-434
AISC 360-16: Lateral-Torsional Buckling Modification Factor, Cb (Section F1)
🇺🇸
US
November 14, 2026
Structural engineering
Europe
STR-406
EN 1991-1-4: Wind Pressure on Duopitch Roofs (Section 7.2.5)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-400
EN 1991-1-4: Wind Pressure on Flat Roofs (Section 7.2.3)
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-39
Timber Beam Design to Eurocode 5 (EC5)
🇪🇺
EUR
November 14, 2026
Structural engineering
United States
STR-167
Concrete Rectangular Beam Design to ACI-318-19
🇺🇸
US
November 14, 2026
Structural engineering
Australia and New Zealand
STR-243
Bolt Group Calculator to AS 4100-2020
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-248
Concrete Beam Design to AS 3600
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-251
Fillet Weld Group Analysis to AS 4100:2020
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-334
Timber Beam Design to AS 1720.1:2010
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-252
Steel Member Design to AS 4100
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-255
Concrete Rectangular Footing Design to AS 3600-2018
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-254
Neutral Axis Calculator: RC Section to AS 3600:2018
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
Australia and New Zealand
STR-256
Reinforcement Development Length Calculator to AS 3600:2018
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
United States
STR-165
Concrete Slab-on-Grade Design Calculator to ACI 360R-10
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-170
Steel Purlins and Girts Calculator to AISI S100-16
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-172
Reinforced Concrete Column P-M Interaction Diagram Generator
🇺🇸
US
November 14, 2026
Electrical engineering
Global
ELE-347
Logic Gates Simulator
🌐
Global
November 14, 2026
Structural engineering
Global
STR-359
Beam Analysis Pack using Macaulay's Theorem
🌐
Global
November 14, 2026
Structural engineering
Global
STR-222
Concreteproperties py: Analyse reinforced concrete cross-sections
🌐
Global
November 14, 2026
Structural engineering
United States
STR-223
Steelpy: Automate bending, shear, or slenderness checks
🇺🇸
US
November 14, 2026
Structural engineering
Australia and New Zealand
STR-288
Concrete Braced Wall Design to AS3600
🇦🇺
AS/NZ
November 14, 2026
Structural engineering
United States
STR-289
Concrete Pad Footing Design to ACI 318-19
🇺🇸
US
November 14, 2026
Geotechnical engineering
Global
GEO-219
Bearing Capacity for Shallow Foundations: Meyerhof's Method
🌐
Global
November 14, 2026
Structural engineering
United States
STR-300
ACI 318-19: Nominal Axial Strength - Non-Prestressed Columns (Cl. 22.4.2.2)
🇺🇸
US
November 14, 2026
Structural engineering
Global
STR-303
Flexural Strength - Nominal Moment Strength of Rectangular Beam
🌐
Global
November 14, 2026
Structural engineering
United States
STR-302
ACI 318-19: Shear Strength - Nominal Shear Strength Provided by Shear Reinforcement (Cl. 22.5.8.3)
🇺🇸
US
November 14, 2026
Structural engineering
Europe
STR-301
Timber Bearing Check to EC5 - Cl 5.2.1.3
🇪🇺
EUR
November 14, 2026
Structural engineering
Global
STR-304
Reinforcement Layout - Bar Spacing and Steel Area for Rectangular Section
🌐
Global
November 14, 2026
Structural engineering
Global
STR-305
Rectangular Section - Geometric Properties
🌐
Global
November 14, 2026
Structural engineering
United States
STR-306
ACI 318-19: Shear Strength - Maximum Nominal Shear Strength of Concrete (Cl. 22.5.5.1.1)
🇺🇸
US
November 14, 2026
Structural engineering
Europe
STR-308
Timber Bending Check to EC5 - Cl 5.2.1.1
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-307
Timber Shear Check to EC5 - Cl 5.2.1.2
🇪🇺
EUR
November 14, 2026
Structural engineering
Europe
STR-309
Timber Deflection Check to EC5 - Table 7.2
🇪🇺
EUR
November 14, 2026
Structural engineering
United States
STR-311
ACI 318-19: Slenderness Effects - Neglect Criteria and Second-Order Moment Limit (Cl. 6.2.5)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-312
ACI 318-19: Effective Flange Width - T-Beam Flange Width Limits (Cl. 6.3.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-313
ACI 318-19: Approximate Moments and Shears - Nonprestressed Continuous Beams and One-Way Slabs (Cl. 6.5)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-314
ACI 318-19: Effective Moment of Inertia - Elastic Analysis at Factored Load (Table 6.6.3.1.1(b))
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-315
ACI 318-19: Stability Properties - Stability Index, Effective Stiffness, and Critical Buckling Load (Cl. 6.6.4.4)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-316
ACI 318-19: Moment Magnification - Nonsway Frames (Cl. 6.6.4.5)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-318
ACI 318-19: Minimum Slab Thickness - Solid Nonprestressed One-Way Slabs (Table 7.3.1.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-317
ACI 318-19: Moment Magnification - Sway Frames (Cl. 6.6.4.6)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-319
ACI 318-19: Minimum Flexural Reinforcement - Nonprestressed One-Way Slabs (Cl. 7.6.1.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-320
ACI 318-19: Minimum Flexural Reinforcement - Prestressed One-Way Slabs, Unbonded Tendons (Cl. 7.6.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-321
ACI 318-19: Minimum Slab Thickness - Nonprestressed Two-Way Slabs Without Interior Beams (Cl. 8.3.1.1, Table 8.3.1.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-322
ACI 318-19: Minimum Slab Thickness - Nonprestressed Two-Way Slabs With Beams on All Sides (Cl. 8.3.1.2, Table 8.3.1.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-324
ACI 318-19: Factored Two-Way Shear Stress with Moment Transfer by Eccentricity of Shear (Cl. 8.4.4.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-323
ACI 318-19: Fraction of Slab Moment Resisted by Column (Cl. 8.4.2.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-325
ACI 318-19: Minimum Flexural Reinforcement - Nonprestressed Two-Way Slabs (Cl. 8.6.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-327
ACI 318-19: Beam Axial Load Limit - Tension-Controlled Condition (Cl. 9.3.3.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-326
ACI 318-19: Minimum Beam Depth - Nonprestressed Beams (Table 9.3.1.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-328
ACI 318-19: Minimum Flexural Reinforcement - Nonprestressed Beams (Cl. 9.6.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-329
ACI 318-19: Minimum Shear Reinforcement - Nonprestressed Beams (Cl. 9.6.3)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-330
ACI 318-19: Minimum Torsional Reinforcement - Nonprestressed Beams (Cl. 9.6.4)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-331
ACI 318-19: Maximum Spacing of Shear Reinforcement Legs - Beams (Table 9.7.6.2.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-332
ACI 318-19: Deep Beam Dimensional Limit (Cl. 9.9.2.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-333
ACI 318-19: Longitudinal Reinforcement Limits and Minimum Shear Reinforcement - Nonprestressed Columns (Cl. 10.6)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-334
ACI 318-19: Maximum Spacing of Shear Reinforcement - Columns (Table 10.7.6.5.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-336
ACI 318-19: Simplified Wall Design - Axial Load with Out-of-Plane Flexure (Cl. 11.5.3)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-335
ACI 318-19: Minimum Wall Thickness (Table 11.3.1.1)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-337
ACI 318-19: In-Plane Shear Strength - Structural Walls (Cl. 11.5.4)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-338
ACI 318-19: Maximum Reinforcement Spacing and Two-Layer Requirement - Walls (Cl. 11.7.2, 11.7.3)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-339
ACI 318-19: Alternative Method for Out-of-Plane Slender Wall Analysis (Cl. 11.8)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-340
ACI 318-19: Diaphragms - In-plane shear strength (12.5.3)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-341
ACI 318-19: Deep foundation members - Allowable axial strength (13.4.2)
🇺🇸
US
November 14, 2026
Structural engineering
United States
STR-342
ACI 318-19: Deep foundation members - Strength design reduction factor for compression (13.4.3.2, Table 13.4.3.2)
🇺🇸
US
November 14, 2026
Can't find what you're looking for?
Request template
No results found

You can try using different keywords, checking your typo or adjusting filters.

Still can't find what you're looking for? Request a template